Language of instruction: |
English |
Type of course: |
Non-Departmental Elective |
Course Level: |
Bachelor’s Degree (First Cycle)
|
Mode of Delivery: |
Face to face
|
Course Coordinator : |
Dr. Öğr. Üyesi İREM ŞANAL |
Course Lecturer(s): |
Dr. Öğr. Üyesi ÖMER LÜTFİ UYANIK
Dr. Öğr. Üyesi İREM ŞANAL
|
Recommended Optional Program Components: |
Electrical properties of materials
Magnetic properties of materials
Optical properties of materials |
Course Objectives: |
The aim of this course is to determine the structures of basic material types (metallic, ceramic, polymeric) and of composites and construction materials, also the interrelations between structure and various material properties for each type of material. Applications and limitations of engineering materials, based on their properties, in various fields will be evaluated. Various kinds of construction materials and their important properties along with the principles of corrosion and corrosion prevention will be investigated.
|
Week |
Subject |
Related Preparation |
1) |
|
|
1) |
INTRODUCTION. Materials science and engineering. The components of materials science and engineering and their interrelationships. Classification of materials. Atomic bonding in solids. Bonding forces and energies. Primary interatomic bonds. Secondary bonding. |
|
2) |
THE STRUCTURE OF CRYSTALLINE SOLIDS. Fundamental concepts. Unit cells. Crystal systems. Crystallographic points and directions. Single crystals and polycrystalline materials. Anisotropy. Metallic crystal structures. Polymorphism and allotropy. |
|
3) |
IMPERFECTIONS IN METALLIC CRYSTALS. Point defects. Linear defects. Interfacial defects. Bulk or volume defects. |
|
4) |
MECHANICAL PROPERTIES OF METALS. Concepts of stress and strain. Tension tests and compression tests. Stress-strain behavior in elastic deformation, modulus of elasticity. Elastic properties of materials. Anelasticity. Plastic deformation. Tensile properties. Elastic recovery after plastic deformation. Hardness and hardness testing techniques. |
|
5) |
DISLOCATIONS AND STRENGTHENING MECHANISMS. Dislocations and plastic deformation. Strengthening of metals by grain size reduction. Solid-solution strengthening. Strain hardening. |
|
6) |
FAILURE. Fundamentals of fracture. Ductile fracture. Brittle fracture. Fracture toughness testing. Fundamentals of fatigue. Fatigue limit, fatigue strength, and fatigue life. Factors that affect fatigue life. Generalized creep behavior. Effects of stress and temperature on creep. |
|
7) |
PHASE DIAGRAMS. Components, systems, phases, microstructures. Phase equilibria and equilibrium phase diagrams of binary isomorphous systems. Interpretation of phase diagrams. Phase diagrams of binary eutectic systems. Eutectoid reaction. Introduction to iron-carbon system: The iron - iron carbide phase diagram. |
|
8) |
Midterm |
|
9) |
TYPES AND APPLICATIONS OF METAL ALLOYS. Ferrous alloys: steels and cast irons. Nonferrous alloys: copper and its alloys, aluminum and its alloys, magnesium and its alloys, titanium and its alloys, the refractory metals. |
|
10) |
STRUCTURES, PROPERTIES AND APPLICATIONS OF CERAMICS. Crystal structures of ceramics. Carbons. Imperfections in ceramics. Mechanical properties of ceramics. Glasses. Glass-Ceramics. Clay products, Refractories. Abrasives. Cements. |
|
11) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. The chemistry of polymer molecules. Molecular weight. Molecular shape, molecular structure, molecular configuration. Thermoplastic and thermosetting polymers. Copolymers. Polymer crystallinity. |
|
12) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. (continue) Mechanical behavior of polymers. Viscoelastic materials and dynamic behavior. Melting and glass-transition phenomena. Types of polymers. Miscellaneous applications of polymers. |
|
13) |
COMPOSITES. General aspects and classification of composites. Particle-reinforced composites. Concrete. Fiber-reinforced composites. Structural composites. |
|
14) |
CORROSION AND DEGRADATION OF MATERIALS. Electrochemical considerations. Electrode potentials. The standard EMF series.
Influence of concentration and temperature on cell potential. The galvanic series. Passivity. Forms of corrosion. Corrosion environments. Corrosion prevention. Degradation of polymers. |
|
|
Program Outcomes |
Level of Contribution |
1) |
Using the theoretical/conceptual and practical knowledge acquired for architectural design, design activities and research. |
|
2) |
Identifying, defining and effectively discussing aesthetic, functional and structural requirements for solving design problems using critical thinking methods. |
|
3) |
Being aware of the diversity of social patterns and user needs, values and behavioral norms, which are important inputs in the formation of the built environment, at local, regional, national and international scales. |
|
4) |
Gaining knowledge and skills about architectural design methods that are focused on people and society, sensitive to natural and built environment in the field of architecture. |
|
5) |
Gaining skills to understand the relationship between architecture and other disciplines, to be able to cooperate, to develop comprehensive projects; to take responsibility in independent studies and group work. |
|
6) |
Giving importance to the protection of natural and cultural values in the design of the built environment by being aware of the responsibilities in terms of human rights and social interests. |
|
7) |
Giving importance to sustainability in the solution of design problems and the use of natural and artificial resources by considering the social, cultural and environmental issues of architecture. |
|
8) |
Being able to convey and communicate all kinds of conceptual and practical thoughts related to the field of architecture by using written, verbal and visual media and information technologies. |
|
9) |
Gaining the ability to understand and use technical information about building technology such as structural systems, building materials, building service systems, construction systems, life safety. |
|
10) |
Being aware of legal and ethical responsibilities in design and application processes. |
|