Language of instruction: |
English |
Type of course: |
Non-Departmental Elective |
Course Level: |
Bachelor’s Degree (First Cycle)
|
Mode of Delivery: |
Face to face
|
Course Coordinator : |
Dr. Öğr. Üyesi İREM ŞANAL |
Course Lecturer(s): |
Dr. Öğr. Üyesi ÖMER LÜTFİ UYANIK
Dr. Öğr. Üyesi İREM ŞANAL
|
Recommended Optional Program Components: |
Electrical properties of materials
Magnetic properties of materials
Optical properties of materials |
Course Objectives: |
The aim of this course is to determine the structures of basic material types (metallic, ceramic, polymeric) and of composites and construction materials, also the interrelations between structure and various material properties for each type of material. Applications and limitations of engineering materials, based on their properties, in various fields will be evaluated. Various kinds of construction materials and their important properties along with the principles of corrosion and corrosion prevention will be investigated.
|
Week |
Subject |
Related Preparation |
1) |
|
|
1) |
INTRODUCTION. Materials science and engineering. The components of materials science and engineering and their interrelationships. Classification of materials. Atomic bonding in solids. Bonding forces and energies. Primary interatomic bonds. Secondary bonding. |
|
2) |
THE STRUCTURE OF CRYSTALLINE SOLIDS. Fundamental concepts. Unit cells. Crystal systems. Crystallographic points and directions. Single crystals and polycrystalline materials. Anisotropy. Metallic crystal structures. Polymorphism and allotropy. |
|
3) |
IMPERFECTIONS IN METALLIC CRYSTALS. Point defects. Linear defects. Interfacial defects. Bulk or volume defects. |
|
4) |
MECHANICAL PROPERTIES OF METALS. Concepts of stress and strain. Tension tests and compression tests. Stress-strain behavior in elastic deformation, modulus of elasticity. Elastic properties of materials. Anelasticity. Plastic deformation. Tensile properties. Elastic recovery after plastic deformation. Hardness and hardness testing techniques. |
|
5) |
DISLOCATIONS AND STRENGTHENING MECHANISMS. Dislocations and plastic deformation. Strengthening of metals by grain size reduction. Solid-solution strengthening. Strain hardening. |
|
6) |
FAILURE. Fundamentals of fracture. Ductile fracture. Brittle fracture. Fracture toughness testing. Fundamentals of fatigue. Fatigue limit, fatigue strength, and fatigue life. Factors that affect fatigue life. Generalized creep behavior. Effects of stress and temperature on creep. |
|
7) |
PHASE DIAGRAMS. Components, systems, phases, microstructures. Phase equilibria and equilibrium phase diagrams of binary isomorphous systems. Interpretation of phase diagrams. Phase diagrams of binary eutectic systems. Eutectoid reaction. Introduction to iron-carbon system: The iron - iron carbide phase diagram. |
|
8) |
Midterm |
|
9) |
TYPES AND APPLICATIONS OF METAL ALLOYS. Ferrous alloys: steels and cast irons. Nonferrous alloys: copper and its alloys, aluminum and its alloys, magnesium and its alloys, titanium and its alloys, the refractory metals. |
|
10) |
STRUCTURES, PROPERTIES AND APPLICATIONS OF CERAMICS. Crystal structures of ceramics. Carbons. Imperfections in ceramics. Mechanical properties of ceramics. Glasses. Glass-Ceramics. Clay products, Refractories. Abrasives. Cements. |
|
11) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. The chemistry of polymer molecules. Molecular weight. Molecular shape, molecular structure, molecular configuration. Thermoplastic and thermosetting polymers. Copolymers. Polymer crystallinity. |
|
12) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. (continue) Mechanical behavior of polymers. Viscoelastic materials and dynamic behavior. Melting and glass-transition phenomena. Types of polymers. Miscellaneous applications of polymers. |
|
13) |
COMPOSITES. General aspects and classification of composites. Particle-reinforced composites. Concrete. Fiber-reinforced composites. Structural composites. |
|
14) |
CORROSION AND DEGRADATION OF MATERIALS. Electrochemical considerations. Electrode potentials. The standard EMF series.
Influence of concentration and temperature on cell potential. The galvanic series. Passivity. Forms of corrosion. Corrosion environments. Corrosion prevention. Degradation of polymers. |
|
|
Program Outcomes |
Level of Contribution |
1) |
Adequate knowledge in mathematics, science and electric-electronic engineering subjects; ability to use theoretical and applied information in these areas to model and solve engineering problems. |
|
2) |
Ability to identify, formulate, and solve complex engineering problems; ability to select and apply proper analysis and modeling methods for this purpose. |
|
3) |
Ability to design a complex system, process, device or product under realistic constraints and conditions, in such a way as to meet the desired result; ability to apply modern design methods for this purpose. (Realistic constraints and conditions may include factors such as economic and environmental issues, sustainability, manufacturability, ethics, health, safety issues, and social and political issues, according to the nature of the design.) |
|
4) |
Ability to devise, select, and use modern techniques and tools needed for electrical-electronic engineering practice; ability to employ information technologies effectively. |
|
5) |
Ability to design and conduct experiments, gather data, analyze and interpret results for investigating engineering problems. |
|
6) |
Ability to work efficiently in intra-disciplinary and multi-disciplinary teams; ability to work individually. |
|
7) |
Ability to communicate effectively in English and Turkish (if he/she is a Turkish citizen), both orally and in writing. |
|
8) |
Recognition of the need for lifelong learning; ability to access information, to follow developments in science and technology, and to continue to educate him/herself. |
|
9) |
Awareness of professional and ethical responsibility. |
|
10) |
Information about business life practices such as project management, risk management, and change management; awareness of entrepreneurship, innovation, and sustainable development. |
|
11) |
Knowledge about contemporary issues and the global and societal effects of engineering practices on health, environment, and safety; awareness of the legal consequences of engineering solutions. |
|