MECHATRONICS (TURKISH) | |||||
Associate | TR-NQF-HE: Level 5 | QF-EHEA: Short Cycle | EQF-LLL: Level 5 |
Course Code | Course Name | Semester | Theoretical | Practical | Credit | ECTS |
MKN2018 | Hydraulic and Pneumatic | Fall Spring |
1 | 2 | 2 | 3 |
This catalog is for information purposes. Course status is determined by the relevant department at the beginning of semester. |
Language of instruction: | Turkish |
Type of course: | Departmental Elective |
Course Level: | Associate (Short Cycle) |
Mode of Delivery: | Face to face |
Course Coordinator : | Instructor ŞAFAK BÜLBÜL |
Recommended Optional Program Components: | There is no recomended optional program component for this course. |
Course Objectives: | In this lesson, it is aimed to gain qualifications required for installation of hydraulic and pneumatic systems. |
The students who have succeeded in this course; 1. Recognizes the pneumatic circuit elements. 2. Makes pneumatic circuit design. 3. Installs and runs pneumatic systems. 4. Recognizes the elements of the electro-pneumatic circuit. 5. Makes electro-pneumatic circuit design. 6. Installs and runs electro-pneumatic systems. 7. Recognizes the elements of the hydraulic circuit. 8. Makes hydraulic circuit design. 9. Installs and runs hydraulic systems. 10. Recognizes the elements of the electro-hydraulic circuit. 11. Makes electro-hydraulic circuit design. 12. Installs and runs electro-hydraulic systems. |
Pneumatic components, circuits and systems. Electro-pneumatic circuit components, circuits and systems. Power circuit components, circuits and systems. Electro-hydraulic circuit components, circuits and systems. |
Week | Subject | Related Preparation |
1) | Properties of hydraulic fluids | |
2) | Continuity and Bernoulli's equation | |
3) | Where to use hydraulic systems (machine tools, ships, excavators, etc.). | |
4) | Hydraulic circuits and components used in hydraulic systems | |
5) | Hydraulic circuits and components used in hydraulic systems | |
6) | Hydraulic circuits and components used in hydraulic systems | |
7) | Possible failures, faults and their solution methods for hydraulic systems. | |
8) | Pressure, volume and temperature change relations of air as an ideal gas. | |
9) | Compressor, the receiver, relief valves, control valves and pneumatic cylinders | |
10) | Piston speed, piston force and pneumatic motor calculations of Pneumatic systems | |
11) | Components used in the Pneumatic systems | |
12) | Components used in the Pneumatic systems | |
13) | Components used in the Pneumatic systems | |
14) | Possible failures, faults and their solution methods for pneumatic systems. |
Course Notes / Textbooks: | 1. Demir Kemal, 2010; Hidrolik Pnömatik; Birsen Yayınevi; 2. Karacan İsmail,1994; Pnömatik Kontrol; Bilim Yayıncılık, |
References: | 1. Meslekî Eğitim ve Öğretim Sisteminin Güçlendirilmesi Projesi (MEGEP) Ankara, Ocak 2005 |
Semester Requirements | Number of Activities | Level of Contribution |
Attendance | 10 | % 10 |
Homework Assignments | 6 | % 10 |
Project | 2 | % 20 |
Midterms | 1 | % 20 |
Final | 1 | % 40 |
Total | % 100 | |
PERCENTAGE OF SEMESTER WORK | % 40 | |
PERCENTAGE OF FINAL WORK | % 60 | |
Total | % 100 |
Activities | Number of Activities | Duration (Hours) | Workload |
Course Hours | 14 | 1 | 14 |
Laboratory | 14 | 2 | 28 |
Study Hours Out of Class | 14 | 3 | 42 |
Project | 2 | 10 | 20 |
Homework Assignments | 6 | 2 | 12 |
Midterms | 1 | 1 | 1 |
Final | 1 | 2 | 2 |
Total Workload | 119 |
No Effect | 1 Lowest | 2 Low | 3 Average | 4 High | 5 Highest |
Program Outcomes | Level of Contribution | |
1) | To improve fundamental computer knowledge, to encourage students using office and package programs. | |
2) | Ability to have and use of fundamental mathematics knowledge and skills the usage of relevant materials. | 3 |
3) | Ability to recognize general structures of machine equipments and the features of shaping | 3 |
4) | Ability to grasp manufacturing processes and cutting tool materials, materials, statics, mechanics and fluid science fundemantal knowledge. | 3 |
5) | Ability to draw assembly and auxilary devices as well as to draw whole or details of a system. | |
6) | Ability to have a knowledge of fundemantal manufacturing process such as turning, milling, punching,grinding and welding techniques and to have a self esteem in order to work behind the bench. | |
7) | Ability to do computer aided design and write program on digital benches. | |
8) | Ability to prepare project report, follow up project process and implement projects. | |
9) | ability to learn the areas of usage of electronic circuit components. Ability to grasp and write programs for micro controllers and for their components. Ability to design relevant circuits. | |
10) | Ability to understand the electric motors principles and AC-DC analysis | |
11) | Ability to gain a dominaion on visual programming | |
12) | Having the ability to communicate efficiently in verbal and written Turkish, to know at least one foreign language in order to communicate with the colleagues and customers. |