MECHATRONICS (TURKISH)
Associate	TR-NQF-HE: Level 5	QF-EHEA: Short Cycle	EQF-LLL: Level 5

Course Introduction and Application Information

Course Code	Course Name	Semester	Theoretical	Practical	Credit	ECTS
MKN1002	Analogue and Digital Electronics	Spring	1	4	3	4

Basic information

Language of instruction:	Turkish
Type of course:	Must Course
Course Level:	Associate (Short Cycle)
Mode of Delivery:	Face to face
Course Coordinator :	Instructor ŞAFAK BÜLBÜL
Course Lecturer(s):	Dr. Öğr. Üyesi AHMET NACİ ÜNAL
Recommended Optional Program Components:	There is no recomended optional program component for this course.
Course Objectives:	Course aims to give an introduction to Semiconductor electronic components, (diode, BJT, FET MOSFET), · DC biasing of electronic components and aims also to analyse and design logic circuits by using different techniques.

Learning Outcomes

The students who have succeeded in this course;
1. Describes the PN junction.
2. Describes diode characteristics and catalog information.
3. Establishes single phase filtered and regulated rectifiers.
4. Establishes a three-phase rectifiers.
5. Be able to use transistors as a switching element.
6. Set up transistor amplifier circuits.
7. Be able to use MOSFET transistors as a switching element.
8. Set up operational amplifier circuits.
9. Describes the number systems.
10. Describes the logical gate circuits.
11. Set up circuits of logic functions.
12. Able to do logic circuit simplification techniques.
13. Solves problems of logic and implements logic circuits.
14. Be able to design decoder and encoder circuits.
15. Describes Mux and demux circuits.

Course Content

Modelling the diode forward charecteristics, Diode load line analysis, , Diode equivalent circuits., Bipolar junction transistors (BJT) : Physical operation, Current voltage charecteristics, DC analysis of Bipolar Junction Transistors, Bipolar Junction Transistors AC Analysis, practical considerations., Logic Gates, Boolean Algebra, Boolean Algebra, K-Map, Encoders, Decoders.

Weekly Detailed Course Contents

Week	Subject	Related Preparation
1)	Boolean Algebra	Logic Gates
2)	Karnough Map	Number Systems, Boolean algebra
3)	Logical Gate Circuits	Number systems- adding and subtraction
4)	Encoder, Decoder
5)	Multiplexer, Demultiplexer
6)	Adders, Subtractors
7)	Semiconductor materials
8)	Structure and Types of diodes
9)	Rectifiers
10)	Definition and Types of filters
11)	Definition of the transistor, Structure and Types
12)	Circuit Design Process in Digital Electronics
13)	Circuit Design Process in digital electronics
14)	Analog electronics design stages

Sources

Course Notes / Textbooks:

1. Electronic Fundamentals, Floyd, Buchla, Pearson Yayınevi

References:

1. Dijital ve Analog Elekronik Devreleri, H. Veysel Güleryüz, Ocak 2002 / 1. Baskı / 200 Syf./ Seçkin Yayınevi.
2. Meslek Yüksekokulları ve Fakülteler İçin, Analog Elektronik – 1, Hasan Selçuk Selek, Haziran 2008, 1. Baskı.
3. Sayısal Elektronik, Elektrik, Elektronik Haberleşme, Mekatronik, Endüstriyel Elektronik ve Endüstriyel Otomasyon Programı, Hasan Selçuk Selek, Ocak 2009, 1. Baskı.

Evaluation System

Semester Requirements	Number of Activities	Level of Contribution
Attendance	14	% 0
Homework Assignments	10	% 10
Project	2	% 30
Midterms	1	% 20
Final	1	% 40
Total		% 100
PERCENTAGE OF SEMESTER WORK		% 30
PERCENTAGE OF FINAL WORK		% 70
Total		% 100

ECTS / Workload Table

Activities	Number of Activities	Duration (Hours)	Workload
Course Hours	14	1	14
Laboratory	14	4	56
Study Hours Out of Class	14	2	28
Project	2	10	20
Homework Assignments	10	1	10
Midterms	1	1	1
Final	1	2	2
Total Workload			131

Contribution of Learning Outcomes to Programme Outcomes

No Effect	1 Lowest	2 Low	3 Average	4 High	5 Highest

	Program Outcomes	Level of Contribution
1)	To improve fundamental computer knowledge, to encourage students using office and package programs.
2)	Ability to have and use of fundamental mathematics knowledge and skills the usage of relevant materials.	5
3)	Ability to recognize general structures of machine equipments and the features of shaping	2
4)	Ability to grasp manufacturing processes and cutting tool materials, materials, statics, mechanics and fluid science fundemantal knowledge.
5)	Ability to draw assembly and auxilary devices as well as to draw whole or details of a system.
6)	Ability to have a knowledge of fundemantal manufacturing process such as turning, milling, punching,grinding and welding techniques and to have a self esteem in order to work behind the bench.
7)	Ability to do computer aided design and write program on digital benches.
8)	Ability to prepare project report, follow up project process and implement projects.	2
9)	ability to learn the areas of usage of electronic circuit components. Ability to grasp and write programs for micro controllers and for their components. Ability to design relevant circuits.	5
10)	Ability to understand the electric motors principles and AC-DC analysis	5
11)	Ability to gain a dominaion on visual programming
12)	Having the ability to communicate efficiently in verbal and written Turkish, to know at least one foreign language in order to communicate with the colleagues and customers.