BME4010 Healthcare Facility Guidelines and StandardsBahçeşehir UniversityDegree Programs ELECTRICAL AND ELECTRONICS ENGINEERINGGeneral Information For StudentsDiploma SupplementErasmus Policy StatementNational QualificationsBologna Commission
ELECTRICAL AND ELECTRONICS ENGINEERING
Bachelor TR-NQF-HE: Level 6 QF-EHEA: First Cycle EQF-LLL: Level 6

Course Introduction and Application Information

Course Code Course Name Semester Theoretical Practical Credit ECTS
BME4010 Healthcare Facility Guidelines and Standards Spring 3 0 3 6
This catalog is for information purposes. Course status is determined by the relevant department at the beginning of semester.

Basic information

Language of instruction: English
Type of course: Non-Departmental Elective
Course Level: Bachelor’s Degree (First Cycle)
Mode of Delivery: Face to face
Course Coordinator : Prof. Dr. ALİ YEKTA ÜLGEN
Course Objectives: To learn the design and certification requirements for Hospitals, Health Care Facility Management and Safety.

Learning Outcomes

The students who have succeeded in this course;
Guidelines and Minimum Requirements for Design and Construction of Hospital and Health Care Facilities

Course Content

Guidelines and Minimum Requirements for Design and Construction of Hospital and Health Care Facilities; Sterilization, Medical Gas Pipeline System, Earth Grounding, Clean air systems, Hazardous materials and Risk Control, Patient Safety.

Weekly Detailed Course Contents

Week Subject Related Preparation
1) Guidelines for Design of Health Care Facilities (AIA)
2) Hospital Accreditation and JCI Standards; QHA Trent Accreditation Standards
3) Design Requirements for ICU, OR, X-Ray Department, PET Shielding Requirements
4) "Medical Gas Pipeline System, Guidelines for Testing Medical Gases (O2, N20 and Medical Air), Medical-surgical vacuum systems, Design of the Vacuum Pump System, Waste Anesthetic Gas Disposal"
5) Clean-air Systems and Classification, Hospital clean-air zones, Airborne Infection, ISO 14644
6) Particle Counting, Active/Passive Air Sampling, Isolation Rooms Design Requirements
7) Midterm Exam I
8) Earth Grounding System, Isolated Power Systems and Line Isolation Monitor, Conductive Flooring
9) "Guidelines for Design of Sterilization Department, Sterilization Validation, Sterility and Shelf Life, Bowie-Dick test, Chemical indicators, Biological indicators"
10) Sterilization Techniques (EtO, Formaldehyde, Ozone, Plasma , Gamma) Compaing EtO and Plasma sterilization techniques
11) Sterilization Department Design Guidelines, Validation in Sterilization
12) Health Devices IPM System for Medical Device Performance and Safety Measurements
13) Waste Management, Management of Hazardous Materials
14) Midterm Exam II

Sources

Course Notes / Textbooks: Ders Notları; Power Point sunumlar.
References: Joint Commission International Accreditation Standards for Hospitals, 6th Edition, Sterilization, Part 1: Sterilization in Health Care Facilities, AAMI (Association for the Advancement of Medical Instrumentation ), 2015 Edition; EN ISO 14644 Standards; EN ISO 7396; Guidelines for the Design and Construction of Health Care Facilities, American Institute of Architects and the Facility Guidelines Institute, 2014; NFPA 99 Standard For Healthcare Facilities, 2015 edition; ECRI Health Devices IPM.

Evaluation System

Semester Requirements Number of Activities Level of Contribution
Homework Assignments 3 % 20
Midterms 2 % 40
Final 1 % 40
Total % 100
PERCENTAGE OF SEMESTER WORK % 60
PERCENTAGE OF FINAL WORK % 40
Total % 100

ECTS / Workload Table

Activities Number of Activities Duration (Hours) Workload
Course Hours 12 3 36
Study Hours Out of Class 14 5 70
Homework Assignments 4 7 28
Midterms 2 3 6
Final 1 2 2
Total Workload 142

Contribution of Learning Outcomes to Programme Outcomes

No Effect 1 Lowest 2 Low 3 Average 4 High 5 Highest
           
Program Outcomes Level of Contribution
1) Adequate knowledge in mathematics, science and electric-electronic engineering subjects; ability to use theoretical and applied information in these areas to model and solve engineering problems.
2) Ability to identify, formulate, and solve complex engineering problems; ability to select and apply proper analysis and modeling methods for this purpose.
3) Ability to design a complex system, process, device or product under realistic constraints and conditions, in such a way as to meet the desired result; ability to apply modern design methods for this purpose. (Realistic constraints and conditions may include factors such as economic and environmental issues, sustainability, manufacturability, ethics, health, safety issues, and social and political issues, according to the nature of the design.)
4) Ability to devise, select, and use modern techniques and tools needed for electrical-electronic engineering practice; ability to employ information technologies effectively.
5) Ability to design and conduct experiments, gather data, analyze and interpret results for investigating engineering problems.
6) Ability to work efficiently in intra-disciplinary and multi-disciplinary teams; ability to work individually.
7) Ability to communicate effectively in English and Turkish (if he/she is a Turkish citizen), both orally and in writing.
8) Recognition of the need for lifelong learning; ability to access information, to follow developments in science and technology, and to continue to educate him/herself.
9) Awareness of professional and ethical responsibility.
10) Information about business life practices such as project management, risk management, and change management; awareness of entrepreneurship, innovation, and sustainable development.
11) Knowledge about contemporary issues and the global and societal effects of engineering practices on health, environment, and safety; awareness of the legal consequences of engineering solutions.