GEP0514 Ottoman Cultural HistoryBahçeşehir UniversityDegree Programs ELECTRICAL AND ELECTRONICS ENGINEERINGGeneral Information For StudentsDiploma SupplementErasmus Policy StatementNational QualificationsBologna Commission
ELECTRICAL AND ELECTRONICS ENGINEERING
Bachelor TR-NQF-HE: Level 6 QF-EHEA: First Cycle EQF-LLL: Level 6

Course Introduction and Application Information

Course Code Course Name Semester Theoretical Practical Credit ECTS
GEP0514 Ottoman Cultural History Spring 3 0 3 5
This catalog is for information purposes. Course status is determined by the relevant department at the beginning of semester.

Basic information

Language of instruction: English
Type of course: GE-Elective
Course Level: Bachelor’s Degree (First Cycle)
Mode of Delivery: Face to face
Course Coordinator : Dr. BURCU ALARSLAN ULUDAŞ
Course Lecturer(s): Prof. Dr. NEJDET ÖZTÜRK
Recommended Optional Program Components: None
Course Objectives:

Learning Outcomes

The students who have succeeded in this course;

Course Content

Weekly Detailed Course Contents

Week Subject Related Preparation
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)

Sources

Course Notes / Textbooks: Hans Dernschwam, İstanbul ve Anadolu’ya Seyahat Günlüğü, çev. Yaşar Önen, Mersin 1992.
Joseph de Tournefort, Tournefort Seyahatnamesi, I, ed. Stefanos Yerasimos, İstanbul 2005.
M. Fuad Köprülü, Osmanlı İmparatorluğu’nun Kuruluşu, 2. baskı Ankara 1972.
Metin And, Osmanlı Şenliklerinde Türk Sanatları, Ankara 1982.
Necdet Öztürk, 14-15. Asır Osmanlı Kültür Tarihi, Devlet Düzeni-Sosyal Hayat, İstanbul 2014.
References: Osmanlı’da Adalet ve Hoşgörü Kavramları”, Boztepe, sayı 1 (Sakarya/Ekim-2002), s. 7-8;
Osmanlı Devleti’nin Kuruluşunda Etkili Olan Maddî ve Manevî Dinamikler”, Boztepe, sayı 2 (Ocak-2003), s. 7-8.
“Osmanlılarda Hukuk Sistemi ve Uygulanışı”, Süleyman Demirel Üniversitesi Fen-Edebiyat Fakültesi Sosyal Bilimler Dergisi, sayı 4 (1999), s. 43-53.
Osmanlılarda Hapis Olayları (1300-1512)-Türkçe Kroniklere Göre -”, Hapishane Kitabı, edl. Emine Gürsoy Naskali-Hilal Oytun Altun, İstanbul 2005, s. 101-129.
“Fatih Sultan Mehmed’in Çok Tartışılan Kararı: Kardeş Katli Meselesi”, Boztepe, sayı 3, Nisan 2003, s. 5-6.
“Osmanlı Devleti’nde Bazı Kamu Görevlilerinin Hapisle Cezalandırılmalarına İlişkin İlk Bilgiler (1300-1453)”, Sosyal Siyaset Konferansları, Prof. Dr. Turan Yazgan’a Armağan Özel Sayısı, İ.Ü. İktisat Fakültesi yayını, İstanbul 2005, 899-909.
“Osmanlıda İdamlar (1299-1500)”, İğdiş, Sünnet, Bedene Şiddet Kitabı, edl. Emine Gürsoy Naskali-Aylin Koç, İstanbul 2009, s. 5-22.
“Alp-erenlerden Anadolu ve Rumeli Gazilerine”, Türk Dünyası Tarih Dergisi (TDTD), sayı 194 (Şubat-2003), s. 58-59.
“Osmanlı İlim ve Kültür Hayatındaki Önemli Gelişmeler (1421-1512)”, Türk Kültürü İncelemeleri Dergisi (TKİD), II (2000), 49-70.
“Fatih Sultan Mehmed Devri İlim ve Kültür Hayatına Genel Bir Bakış”, TDTD, sayı 210 (Haziran-2004), 36-43.
İmparatorluk Tarihinin Kalemli Muhafızları Osmanlı Tarihçileri Ahmedî’den Ahmed Refik’e-, Bilge Kültür Sanat, İstanbul 2015, 357 s. + Ekler (Osmanlı Türkçesi Örnek Metinleri: s. 361-448).
Robert Mantran, 17. Yüzyılın İkinci Yarısında İstanbul, I, çev. Mehmet Ali Kılıçbay-Enver Özcan, Ankara 1990.

Evaluation System

Semester Requirements Number of Activities Level of Contribution
Total %
PERCENTAGE OF SEMESTER WORK % 0
PERCENTAGE OF FINAL WORK %
Total %

Contribution of Learning Outcomes to Programme Outcomes

No Effect 1 Lowest 2 Low 3 Average 4 High 5 Highest
           
Program Outcomes Level of Contribution
1) Adequate knowledge in mathematics, science and electric-electronic engineering subjects; ability to use theoretical and applied information in these areas to model and solve engineering problems.
2) Ability to identify, formulate, and solve complex engineering problems; ability to select and apply proper analysis and modeling methods for this purpose.
3) Ability to design a complex system, process, device or product under realistic constraints and conditions, in such a way as to meet the desired result; ability to apply modern design methods for this purpose. (Realistic constraints and conditions may include factors such as economic and environmental issues, sustainability, manufacturability, ethics, health, safety issues, and social and political issues, according to the nature of the design.)
4) Ability to devise, select, and use modern techniques and tools needed for electrical-electronic engineering practice; ability to employ information technologies effectively.
5) Ability to design and conduct experiments, gather data, analyze and interpret results for investigating engineering problems.
6) Ability to work efficiently in intra-disciplinary and multi-disciplinary teams; ability to work individually.
7) Ability to communicate effectively in English and Turkish (if he/she is a Turkish citizen), both orally and in writing.
8) Recognition of the need for lifelong learning; ability to access information, to follow developments in science and technology, and to continue to educate him/herself.
9) Awareness of professional and ethical responsibility.
10) Information about business life practices such as project management, risk management, and change management; awareness of entrepreneurship, innovation, and sustainable development.
11) Knowledge about contemporary issues and the global and societal effects of engineering practices on health, environment, and safety; awareness of the legal consequences of engineering solutions.