Language of instruction: |
English |
Type of course: |
Non-Departmental Elective |
Course Level: |
Bachelor’s Degree (First Cycle)
|
Mode of Delivery: |
Face to face
|
Course Coordinator : |
Dr. Öğr. Üyesi İREM ŞANAL |
Course Lecturer(s): |
Dr. Öğr. Üyesi ÖMER LÜTFİ UYANIK
Dr. Öğr. Üyesi İREM ŞANAL
|
Recommended Optional Program Components: |
Electrical properties of materials
Magnetic properties of materials
Optical properties of materials |
Course Objectives: |
The aim of this course is to determine the structures of basic material types (metallic, ceramic, polymeric) and of composites and construction materials, also the interrelations between structure and various material properties for each type of material. Applications and limitations of engineering materials, based on their properties, in various fields will be evaluated. Various kinds of construction materials and their important properties along with the principles of corrosion and corrosion prevention will be investigated.
|
Week |
Subject |
Related Preparation |
1) |
|
|
1) |
INTRODUCTION. Materials science and engineering. The components of materials science and engineering and their interrelationships. Classification of materials. Atomic bonding in solids. Bonding forces and energies. Primary interatomic bonds. Secondary bonding. |
|
2) |
THE STRUCTURE OF CRYSTALLINE SOLIDS. Fundamental concepts. Unit cells. Crystal systems. Crystallographic points and directions. Single crystals and polycrystalline materials. Anisotropy. Metallic crystal structures. Polymorphism and allotropy. |
|
3) |
IMPERFECTIONS IN METALLIC CRYSTALS. Point defects. Linear defects. Interfacial defects. Bulk or volume defects. |
|
4) |
MECHANICAL PROPERTIES OF METALS. Concepts of stress and strain. Tension tests and compression tests. Stress-strain behavior in elastic deformation, modulus of elasticity. Elastic properties of materials. Anelasticity. Plastic deformation. Tensile properties. Elastic recovery after plastic deformation. Hardness and hardness testing techniques. |
|
5) |
DISLOCATIONS AND STRENGTHENING MECHANISMS. Dislocations and plastic deformation. Strengthening of metals by grain size reduction. Solid-solution strengthening. Strain hardening. |
|
6) |
FAILURE. Fundamentals of fracture. Ductile fracture. Brittle fracture. Fracture toughness testing. Fundamentals of fatigue. Fatigue limit, fatigue strength, and fatigue life. Factors that affect fatigue life. Generalized creep behavior. Effects of stress and temperature on creep. |
|
7) |
PHASE DIAGRAMS. Components, systems, phases, microstructures. Phase equilibria and equilibrium phase diagrams of binary isomorphous systems. Interpretation of phase diagrams. Phase diagrams of binary eutectic systems. Eutectoid reaction. Introduction to iron-carbon system: The iron - iron carbide phase diagram. |
|
8) |
Midterm |
|
9) |
TYPES AND APPLICATIONS OF METAL ALLOYS. Ferrous alloys: steels and cast irons. Nonferrous alloys: copper and its alloys, aluminum and its alloys, magnesium and its alloys, titanium and its alloys, the refractory metals. |
|
10) |
STRUCTURES, PROPERTIES AND APPLICATIONS OF CERAMICS. Crystal structures of ceramics. Carbons. Imperfections in ceramics. Mechanical properties of ceramics. Glasses. Glass-Ceramics. Clay products, Refractories. Abrasives. Cements. |
|
11) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. The chemistry of polymer molecules. Molecular weight. Molecular shape, molecular structure, molecular configuration. Thermoplastic and thermosetting polymers. Copolymers. Polymer crystallinity. |
|
12) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. (continue) Mechanical behavior of polymers. Viscoelastic materials and dynamic behavior. Melting and glass-transition phenomena. Types of polymers. Miscellaneous applications of polymers. |
|
13) |
COMPOSITES. General aspects and classification of composites. Particle-reinforced composites. Concrete. Fiber-reinforced composites. Structural composites. |
|
14) |
CORROSION AND DEGRADATION OF MATERIALS. Electrochemical considerations. Electrode potentials. The standard EMF series.
Influence of concentration and temperature on cell potential. The galvanic series. Passivity. Forms of corrosion. Corrosion environments. Corrosion prevention. Degradation of polymers. |
|
|
Program Outcomes |
Level of Contribution |
1) |
Adequate knowledge of subjects specific to mathematics (analysis, linear, algebra, differential equations, statistics), science (physics, chemistry, biology) and related engineering discipline, and the ability to use theoretical and applied knowledge in these fields in complex engineering problems. |
|
2) |
Identify, formulate, and solve complex Biomedical Engineering problems; select and apply proper modeling and analysis methods for this purpose |
|
3) |
Design complex Biomedical systems, processes, devices or products under realistic constraints and conditions, in such a way as to meet the desired result; apply modern design methods for this purpose. |
|
4) |
Devise, select, and use modern techniques and tools needed for solving complex problems in Biomedical Engineering practice; employ information technologies effectively. |
|
5) |
Design and conduct numerical or physical experiments, collect data, analyze and interpret results for investigating the complex problems specific to Biomedical Engineering. |
|
6) |
Cooperate efficiently in intra-disciplinary and multi-disciplinary teams; and show self-reliance when working on Biomedical Engineering-related problems. |
|
7) |
Ability to communicate effectively in Turkish, oral and written, to have gained the level of English language knowledge (European Language Portfolio B1 general level) to follow the innovations in the field of Biomedical Engineering; gain the ability to write and understand written reports effectively, to prepare design and production reports, to make effective presentations, to give and receive clear and understandable instructions. |
|
8) |
Recognize the need for life-long learning; show ability to access information, to follow developments in science and technology, and to continuously educate oneself. |
|
9) |
Having knowledge for the importance of acting in accordance with the ethical principles of biomedical engineering and the awareness of professional responsibility and ethical responsibility and the standards used in biomedical engineering applications |
|
10) |
Learn about business life practices such as project management, risk management, and change management; develop an awareness of entrepreneurship, innovation, and sustainable development. |
|
11) |
Acquire knowledge about the effects of practices of Biomedical Engineering on health, environment, security in universal and social scope, and the contemporary problems of Biomedical Engineering; is aware of the legal consequences of Mechatronics engineering solutions. |
|