Language of instruction: |
English |
Type of course: |
Non-Departmental Elective |
Course Level: |
Bachelor’s Degree (First Cycle)
|
Mode of Delivery: |
Face to face
|
Course Coordinator : |
Dr. Öğr. Üyesi İREM ŞANAL |
Course Lecturer(s): |
Dr. Öğr. Üyesi ÖMER LÜTFİ UYANIK
Dr. Öğr. Üyesi İREM ŞANAL
|
Recommended Optional Program Components: |
Electrical properties of materials
Magnetic properties of materials
Optical properties of materials |
Course Objectives: |
The aim of this course is to determine the structures of basic material types (metallic, ceramic, polymeric) and of composites and construction materials, also the interrelations between structure and various material properties for each type of material. Applications and limitations of engineering materials, based on their properties, in various fields will be evaluated. Various kinds of construction materials and their important properties along with the principles of corrosion and corrosion prevention will be investigated.
|
Week |
Subject |
Related Preparation |
1) |
|
|
1) |
INTRODUCTION. Materials science and engineering. The components of materials science and engineering and their interrelationships. Classification of materials. Atomic bonding in solids. Bonding forces and energies. Primary interatomic bonds. Secondary bonding. |
|
2) |
THE STRUCTURE OF CRYSTALLINE SOLIDS. Fundamental concepts. Unit cells. Crystal systems. Crystallographic points and directions. Single crystals and polycrystalline materials. Anisotropy. Metallic crystal structures. Polymorphism and allotropy. |
|
3) |
IMPERFECTIONS IN METALLIC CRYSTALS. Point defects. Linear defects. Interfacial defects. Bulk or volume defects. |
|
4) |
MECHANICAL PROPERTIES OF METALS. Concepts of stress and strain. Tension tests and compression tests. Stress-strain behavior in elastic deformation, modulus of elasticity. Elastic properties of materials. Anelasticity. Plastic deformation. Tensile properties. Elastic recovery after plastic deformation. Hardness and hardness testing techniques. |
|
5) |
DISLOCATIONS AND STRENGTHENING MECHANISMS. Dislocations and plastic deformation. Strengthening of metals by grain size reduction. Solid-solution strengthening. Strain hardening. |
|
6) |
FAILURE. Fundamentals of fracture. Ductile fracture. Brittle fracture. Fracture toughness testing. Fundamentals of fatigue. Fatigue limit, fatigue strength, and fatigue life. Factors that affect fatigue life. Generalized creep behavior. Effects of stress and temperature on creep. |
|
7) |
PHASE DIAGRAMS. Components, systems, phases, microstructures. Phase equilibria and equilibrium phase diagrams of binary isomorphous systems. Interpretation of phase diagrams. Phase diagrams of binary eutectic systems. Eutectoid reaction. Introduction to iron-carbon system: The iron - iron carbide phase diagram. |
|
8) |
Midterm |
|
9) |
TYPES AND APPLICATIONS OF METAL ALLOYS. Ferrous alloys: steels and cast irons. Nonferrous alloys: copper and its alloys, aluminum and its alloys, magnesium and its alloys, titanium and its alloys, the refractory metals. |
|
10) |
STRUCTURES, PROPERTIES AND APPLICATIONS OF CERAMICS. Crystal structures of ceramics. Carbons. Imperfections in ceramics. Mechanical properties of ceramics. Glasses. Glass-Ceramics. Clay products, Refractories. Abrasives. Cements. |
|
11) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. The chemistry of polymer molecules. Molecular weight. Molecular shape, molecular structure, molecular configuration. Thermoplastic and thermosetting polymers. Copolymers. Polymer crystallinity. |
|
12) |
STRUCTURES, PROPERTIES, AND APPLICATIONS OF POLYMERS. (continue) Mechanical behavior of polymers. Viscoelastic materials and dynamic behavior. Melting and glass-transition phenomena. Types of polymers. Miscellaneous applications of polymers. |
|
13) |
COMPOSITES. General aspects and classification of composites. Particle-reinforced composites. Concrete. Fiber-reinforced composites. Structural composites. |
|
14) |
CORROSION AND DEGRADATION OF MATERIALS. Electrochemical considerations. Electrode potentials. The standard EMF series.
Influence of concentration and temperature on cell potential. The galvanic series. Passivity. Forms of corrosion. Corrosion environments. Corrosion prevention. Degradation of polymers. |
|
|
Program Outcomes |
Level of Contribution |
1) |
Adequate knowledge in mathematics, science and computer engineering; the ability to use theoretical and practical knowledge in these areas in complex engineering problems.
|
|
2) |
Ability to identify, formulate, and solve complex engineering problems; ability to select and apply appropriate analysis and modeling methods for this purpose.
|
2 |
3) |
Ability to design a complex system, process, device or product to meet specific requirements under realistic constraints and conditions; ability to apply modern design methods for this purpose.
|
3 |
4) |
Ability to develop, select and use modern techniques and tools necessary for the analysis and solution of complex problems encountered in computer engineering applications; ability to use information technologies effectively.
|
|
5) |
Ability to design, conduct experiments, collect data, analyze and interpret results for the study of complex engineering problems or computer engineering research topics.
|
3 |
6) |
Ability to work effectively within and multi-disciplinary teams; individual study skills.
|
2 |
7) |
Ability to communicate effectively in verbal and written Turkish; knowledge of at least one foreign language; ability to write active reports and understand written reports, to prepare design and production reports, to make effective presentations, to give and receive clear and understandable instructions.
|
|
8) |
Awareness of the necessity of lifelong learning; ability to access information, to follow developments in science and technology and to renew continuously.
|
|
9) |
To act in accordance with ethical principles, professional and ethical responsibility; information on the standards used in engineering applications.
|
|
10) |
Information on business practices such as project management, risk management and change management; awareness of entrepreneurship and innovation; information about sustainable development.
|
|
11) |
Knowledge of the effects of engineering practices on health, environment and safety in the universal and social scale and the problems of the era reflected in engineering; awareness of the legal consequences of engineering solutions.
|
|